About Prep4sures H3C GB0-371-ENU Exam

Considerate aftersales service 24/7

Our aftersales service agents often check Email box to solve your problems as soon as possible. If we have updates of H3CSE-Routing & Switching latest training vce, the system will automatically send you the latest version. If you haven't received within 24 hours, please contact with us. Tip: please do not forget checking your junk mails.

Instant Download: Our system will send you the GB0-371-ENU braindumps files you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Reasonable price & high passing rate

The reasonable price and high passing rate have obviously become a preponderance of the GB0-371-ENU exam study material when comparing with others in the markets. Here are some examples: you don't need to spend too much money to buy this GB0-371-ENU exam study material with greater opportunity of passing the exam, but success will follow behind. Besides, with the data collected form our consumers who bought our H3CSE-Routing & Switching useful study files before, the passing rate has up to 95 to 100 percent. We also promise that if you buy our study material, you can obtain free updates of the latest materials within one year after purchase.

Free download demo & Full refund service

One obvious defect of electronic commerce lies in that we are unable to touch it. Similarly, though our GB0-371-ENU exam study material have been called as the leader in the field, you probably still worry about it. That is inevitable, and we surely understand it. One of the principles in our company is that we never cheat consumer with fake materials and information. You can input your e-mail address, and download GB0-371-ENU free demo as reference, which can make you know more about our GB0-371-ENU valid pdf practice. We promised to you that our company always put your benefits at primary position. All of our GB0-371-ENU exam study material provides full refund service on condition that you fail the test unluckily.

As we know, the area workers are always facing high chance and many challenges in this high-speed world, so we must strengthen our ability to fit this competitive social context. The test you are trying to pass now can make you prominent in your working, and the H3C GB0-371-ENU reliable study material is really your best choice to pass the exam. We can prove it by following reasons for your reference.

Concise layout gives you more convenient experience

The GB0-371-ENU valid pdfs practice has three versions up to now: PDF & PC test engine & Online test engine. No matter which version you may choose, all of them have been laid out already by our experts, so they are helpful to your reading and practicing. The concise layout can make you find what you want to read and the points you want reviews.

Professional test study material

Our GB0-371-ENU exam study material is 100% based on analysis of the previous exam test. Through our professional exam study material compiled by expert teams, you can hold the test for its suitability and accuracy. The GB0-371-ENU test training pdf is easy to comprehend and learn. You can compare our GB0-371-ENU exam study material with materials from peer. Our GB0-371-ENU updated training material totally are made based on real tests over the past years, so you can totally believe our exam study material when preparing for your tests.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. In the network as shown in the figure, the interconnection lines between RT1, RT2, RT3, RT4 and RT5 are all Gigabit Ethernet cables, running OSPF, and after publishing the corresponding network segments to achieve routing interoperability, the routers all run the PIM SM protocol. RP is 1.1.1.1 RT4 is connected to the receiver, and IGMP is enabled on the corresponding interface. After the initial multicast traffic forwarded along the RPT is switched to SPT, which of the following routers constitutes SPT

A) RT5
B) RT2
C) RT3
D) RT1
E) RT4

2. Regarding the compatible operation of RSTP and STP, the following statements are correct:

A) When the RSTP switch and STP switch work together, the port connected to the STP switch will switch to STP mode
B) When the connection between the RSTP switch and the STP switch is disconnected, the port previously connected to the STP switch will automatically switch back to RSTP mode
C) When a port on the RSTP switch is switched to STP mode, the port will no longer have the rapid convergence characteristics of RSTP
D) When the RSTP switch and STP switch work together, you need to switch the working mode of the RSTP switch to STP through the command stpmode stp

3. In the switching network as shown in the figure, all three switches have only default VLAN1, the interconnection ports of the three switches are Trunk, and all VLANs are allowed to pass, and the three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet 1/0/1 port is set to Forbidden on the switch SWA, and the display vlan SWC is executed on the SWC. The existing VLANs on SWC are available (choose one or Multiple)

A) VLAN 1
B) VLAN20
C) VLAN 10

4. As shown in the network, the switch enables RSTP, assuming that the cost of each link is the same, the following statements are correct:

A) If there are multiple alternate ports on the SWD, when the root port is down, SWD will select the port with the highest priority from these alternate ports as the new root port
B) Assuming that the spanning tree operating mode of SWB and SWC is modified to STP, the Alternate port of SWD can still enter the forwarding state directly after it becomes the new root port
C) After topology convergence, SWD will have one port as an alternate port
D) If the SWD port EO/1 is down, the SWD port E0/2 will immediately change from the Alternate port to the new root port

5. As shown in the network topology, if STP is enabled on SWA and SWD, the statement about SWA and SWD port status changes is correct.

A) If i sets the bridge priority of SWD to 0, the role of SWA port E0/1 will be changed from a designated port to a root port, and the port will remain in the Forwarding state during the transition.
B) If the cost value of the SWD port EO/2 link is changed to 100, the port E0/2 will immediately turn into the new root port and enter the Forwarding state
C) If the SWD bridge priority is set to 0, the SWD ports E0/1 and E0/2 will enter the Forwarding state after going through the Listening state and the Learning state
D) SWD port EO/1 will change from designated port to root port in the Listening state

Solutions: