Dumps Moneyack Guarantee - 350-401 Dumps UpTo 50% Off
Updated Apr-2026 Pass 350-401 Exam - Real Practice Test Questions
NEW QUESTION # 137
How does Cisco Trustsec enable more access controls for dynamic networking environments and data centers?
- A. classifies traffic based on advanced application recognition
- B. uses flexible NetFlow
- C. assigns a VLAN to the endpoint
- D. classifies traffic based on the contextual identity of the endpoint rather than its IP address correct
Answer: D
NEW QUESTION # 138
Refer to the exhibit.
--Image Miss--
An engineer must create a configuration that prevents R3from receiving the LSA about 172.16.1.4/32.Which configuration set achieves this goal?
A)
B)
C)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 139
Refer to the exhibit.
These commands have been added to the configuration of a switch Which command flags an error if it is added to this configuration?
- A. monitor session 1 source interface port-channel 7,port-channel8
- B. monitor session 1 source vlan 10
- C. monitor session 1 source interface port-channel 6
- D. monitor session 1 source interface FatEtheret0/1 x
Answer: B
NEW QUESTION # 140
A vulnerability assessment highlighted that remote access to the switches is permitted using unsecure and unencrypted protocols Which configuration must be applied to allow only secure and reliable remote access for device administration?
- A. line vty 0 15
login local
transport input none - B. line vty 0 15
login local
transport input telnet ssh - C. line vty 0 15
login local
transport input ssh - D. line vty 0 15
login local
transport input all
Answer: C
NEW QUESTION # 141
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
Explanation:
Graphical user interface, text, application, email Description automatically generated
NEW QUESTION # 142
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 143
Refer to the exhibit. Which two statements about the EEM applet configuration are true? (Choose two.)
- A. The running configuration is displayed only if the letter Y is entered at the CLI.
- B. The EEM applet runs before the CLI command is executed.
- C. The EEM applet requires a case-insensitive response.
- D. The EEM applet runs after the CLI command is executed.
Answer: A,B
Explanation:
When you use the sync yes option in the event cli command, the EEM applet runs before the CLI command is executed. The EEM applet should set the _exit_status variable to indicate whether the CLI command should be executed (_exit_status set to one) or not (_exit_status set to zero).
With the sync no option, the EEM applet is executed in background in parallel with the CLI command.
Reference: https://blog.ipspace.net/2011/01/eem-event-cli-command-options-and.html
NEW QUESTION # 144
Which template is used when multiple templates are grouped together to run in succession in Cisco DNA Center?
- A. composite
- B. project
- C. configuration
- D. regular
Answer: A
NEW QUESTION # 145
Simulation 05
Answer:
Explanation:
R1
enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/0
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
R2
Enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/0
Ip ospf 1 area 0
Ip ospf network point-to-point
Int et0/1
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
R3
Enable
Config t
Int loop0
Ip ospf 1 area 0
Int et0/1
Ip ospf 1 area 0
Ip ospf network point-to-point
copy run start
Verification:-
NEW QUESTION # 146
Refer to the exhibit.
An engineer must prevent the R6 loopback from getting into Area 2 and Area 3 from Area 0 Which action must the engineer take?
- A. Apply a filter list inbound on R3 and R7
- B. Apply a filter list outbound on R7 only.
- C. Apply a fitter list inbound on R2 and R9
- D. Apply a filter list outbound on R3 and R7
Answer: D
Explanation:
This question asks to prevent route advertised into Area 2 and Area 3 only. It does not ask to prevent route advertised into Area 0 so applying a filter list outbound on R3 and R7 would best fit the requirement.
NEW QUESTION # 147
You have configured router R1 with multiple VRF's in order to support multiple customer VPN networks. If you wanted to see the best path for the 10.2.1.0.24 route in VRF Green, what command would you use?
- A. show ip route 10.2.1.0 vrf Green
- B. show ip route vrf Green 10.2.1.0
- C. show route all 10.2.1.0
- D. show ip route 10.2.1.0 Green
Answer: B
NEW QUESTION # 148
Which exhibit displays a valid JSON file?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 149
Refer to the exhibit.
Which JSON syntax is derived from this data?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 150
Refer to the exhibit. Which Python code parses the response and prints "18:32:21.474 UTC Sun Mar 10 2019"?
- A. print(response[jresult']['body']['simple_time']}
- B. print(response['resut'][0||'simple_time']}
- C. print(response['body']['simple_time']}
- D. print(response[result']['body']['simple_time']}
Answer: D
NEW QUESTION # 151
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 152
......
Concluding Thoughts
Getting the Cisco certification is the requirement of the time. For the Cisco 350-401 exam, all you need is the right mindset, the right motivation, and the right study materials like the official training and study guides. Not consistent content cramming. Not crude study materials. Not long hours of unproductive learning. If you believed your doubters, you would think there’s no way to build an exceptional IT career. But Cisco is here to change the story, giving you the best chance to actualize your potential if you get things right. Ready to take action today? Never forget three things: passion, desire, and commitment. Let’s go!
What Are the Topics Tested in Cisco ENCOR?
If you want to get the passing score in 350-401 exam, you will need to develop advanced skills in the following topics:
- Security
- Automation
- Architecture
The first topic includes seven subtopics. Candidates should understand the difference between various design principles that are related to enterprise networks. Therefore, they will work with concepts such as Tier 2, Tier 3, and Fabric Capacity planning. Also, they will become skilled in handling high availability techniques such as FHRP, SSO, and redundancy. This topic also teaches exam-takers how to analyze WLAN deployment design principles and differentiate on-premises and cloud infrastructure deployments concepts. In addition, they should understand how to explain the Cisco SD-Acces and SD-WAN solution principles and describe concepts related to wired and wireless QoS. Finally, software and hardware switching mechanisms are included in the syllabus as well.
Within the Virtualization domain, candidates will learn different technologies for device virtualization. They will be exposed to concepts like Hypervisor types 1 and 2, virtual machines, and switching. Also, they have to be proficient in configuring and verifying data path virtualization technologies. In this section, they will get a deep-understanding of VRF, GRE, and IPsec tunneling notions. Besides, they will understand how network virtualization concepts such as LISP and VXLAN work.
The third topic is the most important in the overall exam's questions. It concentrates on giving candidates full details of Layer 2 and Layer 3 concepts. Applicants should also know how to troubleshoot, manage, and configure them properly using different tools and features. Also, they will go through Wireless-related concepts and become knowledgeable in the main principles and AP modes, Layer 1 concepts, or antenna types. Plus, they will discover which are the best techniques to troubleshoot WLAN configuration and wireless client connectivity issues. IP services management and deployment is another subtopic included here. Exam-takers will learn how to configure and verify NAP/PAT tools as well as configure multicast and first-hop redundancy protocols.
The fourth section talks about how to properly diagnose network problems. Candidates will learn more about debugs, conditional debugs, traceroute, and ping. They will also become skilled in configuring and verifying device monitoring, NetFlow, Flexible NetFlow, SPAN/RSPAN/ERSPAN, and IPSLA. Also, they will describe Cisco DNA Center workflows that enable them to configure, monitor, configure, and manage networks.
Within the Security domain, individuals will discover how device access controls work. They will learn more about password and line protection, as well as how to use AAA for authorization and authentication. Infrastructure security features configuration and their verification are also included here. Another subtopic handled is related to the REST API security and wireless security. Exam-takers should also know the components of network security design.
The final topic covers automation. It is essential that candidates understand how to interpret basic Python scripts and components. They will develop deep knowledge on how to construct a valid JSON encoded file, understand high-level principles and benefits of YANG and APIs for Cisco DNA Center and vManage. They will also be exposed to the topics like interpreting the response codes of REST API, EEM applet, and understand how to compare agent and agentless orchestration tools to configure, troubleshoot, and manage different network solutions.
Download Free Cisco 350-401 Real Exam Questions: https://realdumps.prep4sures.top/350-401-real-sheets.html