Master 2025 Latest The Questions CCNP Collaboration and Pass 300-815 Real Exam!
Penetration testers simulate 300-815 exam PDF
NEW QUESTION # 100
Which top-level IOS command is needed to begin the configuration of a Cisco Unified Communications Manager Express gateway to enable phones to be registered via SIP?
- A. voice register dn
- B. allow-connections sip to sip
- C. voice service voip
- D. voice register global
Answer: C
Explanation:
You have to enable the registrar service before you can provide the address in voice register global voice service voip allow-connections sip to sip
!--- Enable SIP to SIP calls.
sip
registrar server expires max 1200 min 300
!--- Enable Cisco IOS SIP registrar.
NEW QUESTION # 101
A customer wants to configure their team of 10 agents to answer incoming calls to a common central number. The phone for each team member must ring in sequence and ring four times before moving to the next member's phone. Drag and drop the steps from the left into the order on the right to make this happen.
Answer:
Explanation:
NEW QUESTION # 102
An administrator is working on an issue between the customer s Cisco Unified Border Element and the service provider. The provider only wants to see mid-call signaling from the Cisco Unified Border Element for fax calls.
Which command must be configured on Cisco Unified Border Element?
- A. midcall-signaling passthru media-change
- B. midcall-signaling preserve-codec
- C. no update-callerid
- D. midcall-signallng passthru
Answer: A
NEW QUESTION # 103
Which configuration element of a hunt group allows for changing Calling Party Transformations settings?
- A. hunt list
- B. route group
- C. hunt pilot
- D. line group
Answer: C
Explanation:
https://community.cisco.com/t5/ip-telephony-and-phones/call-alerting-on-hunt-group-as-shared- line/td-p/2658015
NEW QUESTION # 104
An administrator configured Cisco Unified Mobility to block access to remote destinations for certain caller IDs. A user reports that a blocked caller was able to reach a remote destination. Which action resolves the issue?
- A. Configure a mobility identity.
- B. Configure an access list.
- C. Configure Single Number Reach.
- D. Configure Mobile Voice Access.
Answer: B
NEW QUESTION # 105
An administrator is working on an issue between the customer s Cisco Unified Border Element and the service provider. The provider only wants to see mid-call signaling from the Cisco Unified Border Element for fax calls. Which command must be configured on Cisco Unified Border Element?
- A. midcall-signaling passthru media-change
- B. midcall-signaling preserve-codec
- C. no update-callerid
- D. midcall-signallng passthru
Answer: A
NEW QUESTION # 106
Refer to the exhibit.
Refer to the exhibit. An engineer is troubleshooting an issue where inbound Calls are failing after they transferred. The provider reports that update is not supported, and this is causing the calls to fail. Which command should resolve this issue?
- A. no midcall-signaling passthru
- B. no contact-passig
- C. no update-callerId
- D. rel1xx require "100rel"
Answer: D
NEW QUESTION # 107
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
- A. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
- B. R2(config-ephone-dn)#park reservation-group 1
- C. R2(config-ephone-dn)#park reservation-group 60
- D. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
Answer: D
NEW QUESTION # 108
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. +E.164 alternate number mask
- B. external phone number mask
- C. AAR destination mask
- D. called party transform mask
- E. enterrise alternate number mask
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/dialplan.html
NEW QUESTION # 109
Which two features are part of Cisco Unified Mobility? (Choose Two)
- A. Mobile Voice Access
- B. Shared line
- C. Extension Mobility Cross Cluster
- D. Enterprise Feature Access
- E. Device Mobility
Answer: A,D
NEW QUESTION # 110
Refer to the exhibit.
ILS has been configured between two hubs using this configuration. The hubs appear to register successfully, but ILS is not functioning as expected. Which configuration step is missing?
- A. Trust certificates for ILS have not been installed on the clusters
- B. The Cluster IDs have not been set to unique values
- C. A password has never been set for ILS.
- D. Use TLS Certificates must be selected.
Answer: B
NEW QUESTION # 111
Which two extended capabilities must be configured on dial peers for fast start-to-early media scenarios (H.323 to SIP interworking)? (Choose two.)
- A. BFCP
- B. FAX
- C. VIDEO
- D. DTMF
- E. AUDIO
Answer: A,D
Explanation:
Section: Signaling and Media Protocols
NEW QUESTION # 112
Drag and drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk to a SIP provider. The Cisco UCM is currently sending calls to the Cisco Unified Border Element in E. 164 format. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 113
An organization needs a solution to meet these requirements for its Cisco UCM system:
Modify calling party numbers for outbound calls.
Add a prefix for internal calls.
Normalize incoming calls to a consistent format.
Apply different patterns for different device pools.
Which Cisco UCM feature must be used to accomplish these goals?
- A. Call routing rules
- B. Route patterns
- C. Transformation patterns
- D. Translation patterns
Answer: D
NEW QUESTION # 114
Refer to the exhibit.
How many maximum hops can an ILS update traverse?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 115
Refer to the exhibit. An engineer is troubleshooting an issue where inbound Calls are failing after they transferred. The provider reports that update is not supported, and this is causing the calls to fail. Which command should resolve this issue?
- A. rel1xx require "100rel"
- B. no midcall-signaling passthru
- C. no contact-passig
- D. no update-callerId
Answer: D
Explanation:
The exhibit shows a SIP message from a caller named "Amy" to a caller named "Bob". The message contains an "UPDATE" request, which is used to modify the caller ID of an existing call.
However, the provider does not support the UPDATE message, so the call is failing.
The no update-callerId command will disable the sending of UPDATE messages. This will resolve the issue, as the call will no longer be failing due to the unsupported message.
NEW QUESTION # 116
A new solution is configured to support internal, local, and international calling. Calling [+44 1111 1111] from one of the registered internal phones does not work. Local and internal calls seem to work without any problems. The configuration has patterns configured to match the failing dialed number [+44 .... ....]. The other configured patterns show [2...] for internal numbers and [555 ...] for local numbers. International numbers use E.164 as recommended. What is missing to make this solution work?
- A. 001 or 00 must be used instead of the + sign on Cisco UCM
- B. =+ cannot be used in a route pattern, only in a SIP pattern
- C. / in front of the +
- D. \ in front of the +
Answer: D
NEW QUESTION # 117
......
Penetration testers simulate 300-815 exam: https://realdumps.prep4sures.top/300-815-real-sheets.html