2023 Current NSE5_FMG-7.0 dumps Preparation through Our Practice Test
100% Reliable Microsoft NSE5_FMG-7.0 Exam Dumps Test Pdf Exam Material
Fortinet NSE5_FMG-7.0 Certification Exam is designed to test the skills and knowledge of network security professionals in managing and deploying FortiManager 7.0. Fortinet NSE 5 - FortiManager 7.0 certification is part of the Fortinet Network Security Expert (NSE) program and is aimed at validating the expertise of individuals in the field of network security. Candidates who pass NSE5_FMG-7.0 exam are recognized as experts in FortiManager 7.0 and are highly valued in the job market.
The FortiManager 7.0 is Fortinet's security management and automation platform that enables organizations to easily manage their security infrastructure. The NSE5_FMG-7.0 certification exam is designed to test candidates on their understanding of advanced FortiManager 7.0 topics such as complex administrative configurations, device configuration templates, policy packages, and role-based administration.
Fortinet NSE5_FMG-7.0 exam is intended for network administrators, security engineers, and other IT professionals who are responsible for managing security policies and devices in their organization. NSE5_FMG-7.0 exam tests the candidate's ability to configure, deploy and manage Fortinet security solutions using FortiManager 7.0. NSE5_FMG-7.0 exam also covers topics such as device discovery, policy management, user authentication, and configuration backup.
NEW QUESTION # 26
Refer to the exhibit.
Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)
- A. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate
- B. You cannot assign the same ADOM to multiple administrators
- C. It supports the FortiManager script feature
- D. It allows making configuration changes for managed devices on FortiManager panes
Answer: C,D
Explanation:
"FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol."
NEW QUESTION # 27
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed gateways are devices managed by FortiManager in the same ADOM
- B. Managed devices in other ADOMs must be treated as external gateways
- C. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN
- D. External gateways are third-party VPN gateway devices only
Answer: A,B
NEW QUESTION # 28
An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?
- A. virtual-wan-link
- B. port2
- C. auto-discovery
- D. port1
Answer: A
NEW QUESTION # 29
Which two items are included in the FortiManager backup? (Choose two.)
- A. All devices
- B. Global database
- C. Logs
- D. FortiGuard database
Answer: A,B
NEW QUESTION # 30
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to run real-time debugs on the managed devices
- B. Allows FortiManager to download IPS packages
- C. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
- D. Allows FortiManager to automatically configure a default route
Answer: C
NEW QUESTION # 31
View the following exhibit.
An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?
- A. The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate
- B. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted
- C. The unused objects that are not tied to the firewall policies in policy package will be deleted from the
- D. The unused objects that are not tied to the firewall policies will be installed on FortiGate
Answer: B
Explanation:
FortiManager database
NEW QUESTION # 32
View the following exhibit.
Which of the following statements are true based on this configuration setting? (Choose two.)
- A. This setting will enable the ADOMs feature on FortiManager.
- B. This setting will allow automatic updates to the policy package configuration for a managed device.
- C. This setting is applied globally to all ADOMs.
- D. This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.
Answer: C,D
NEW QUESTION # 33
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- C. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- D. FortiGate will reject the CLI commands that will cause the tunnel to go down.
Answer: A
Explanation:
The configuration change will break the fgfm connection, causing the FortiGate unit to attempt to reconnect for 900 seconds. If the FortiGate cannot reconnect, it will rollback to its previous configuration.
NEW QUESTION # 34
Which of the following statements are true regarding VPN Manager? (Choose three.)
- A. VPN Manager automatically adds newly-registered devices to a VPN community.
- B. VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time.
- C. Common IPsec settings need to be configured only once in a VPN Community for all managed gateways.
- D. VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec.
- E. VPN Manager must be enabled on a per ADOM basis.
Answer: B,C,E
NEW QUESTION # 35
View the following exhibit.
What is the purpose of setting ADOM Mode to Advanced?
- A. The setting allows automatic updates to the policy package configuration for a managed device
- B. The setting enables the ADOMs feature on FortiManager
- C. The setting disables concurrent ADOM access and adds ADOM locking
- D. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
Answer: D
NEW QUESTION # 36
What does a policy package status of Conflict indicate?
- A. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.
- B. The policy package configuration has been changed on both FortiManager and the managed device
independently. - C. The policy package does not have a FortiGate as the installation target.
- D. The policy configuration has never been imported after a device was registered on FortiManager.
Answer: B
NEW QUESTION # 37
What is the purpose of the Policy Check feature on FortiManager?
- A. To find and merge duplicate policies in the policy package
- B. To find and provide recommendation for optimizing policies in a policy package
- C. To find and provide recommendation to combine multiple separate policy packages into one common policy package
- D. To find and delete disabled firewall policies in the policy package
Answer: B
NEW QUESTION # 38
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?
- A. When a new policy package is created, the administrator must assign the global policy package from the global ADOM.
- B. When creating a new policy package, the administrator can select the option to assign the global policy
package to the new policy package - C. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.
- D. When a new policy package is created, the administrator needs to reapply the global policy package to
ADOM1.
Answer: C
NEW QUESTION # 39
An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?
- A. It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.
- B. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
- C. It installs the latest configuration on the specified FortiGate and update the revision history database.
- D. It installs the provisioning template configuration on the specified FortiGate.
Answer: B
NEW QUESTION # 40
Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)
- A. Does not back up firmware images saved on FortiManager
- B. Backs up all devices and the FortiGuard database.
- C. Can be configured from the CLI and GUI
- D. Supports FTP, SCP, and SFTP
Answer: A,D
NEW QUESTION # 41
Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?
- A. Security profiles
- B. NSX-T Service Template
- C. SNMP
- D. Routing
Answer: A
NEW QUESTION # 42
Which three settings are the factory default settings on FortiManager? (Choose three.)
- A. Username is admin
- B. port1 interface IP address is 192.168.1.99/24
- C. Password is fortinet
- D. Reports and Event Monitor panes are enabled
- E. FortiAnalyzer features are disabled
Answer: A,B,E
NEW QUESTION # 43
......
Free NSE5_FMG-7.0 Dumps are Available for Instant Access: https://realdumps.prep4sures.top/NSE5_FMG-7.0-real-sheets.html