Download HPE0-J69 Exam Dumps Questions to get 100% Success in HP
100% Accurate Answers! HPE0-J69 Actual Real Exam Questions
NEW QUESTION # 56
While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.
Which objects do you need to create to demonstrate these features? (Choose two.)
- A. File share
- B. Remote copy group
- C. Storage container
- D. Host
- E. Virtual file server
Answer: A,E
NEW QUESTION # 57
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?
- A. Support for combining multiple physical switches in to one virtual switch with a single IP address
- B. In-flight compression and encryption provides efficient link utilization and security
- C. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
- D. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
Answer: A
NEW QUESTION # 58
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?
- A. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
- B. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- C. A maximum of two switches can be used in an IRF stack when connecting storage.
- D. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
Answer: C
NEW QUESTION # 59
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
- A. Ethernet switches, Nimble FC card, dedicated FC for servers
- B. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
- C. FC switches, Nimble FC card, FC adapters for servers
- D. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
Answer: D
NEW QUESTION # 60
Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)
- A. Modify administrative privileges
- B. Find noisy neighbors
- C. Review backup schedules
- D. View replication policies
- E. Locate inactive VMs
Answer: B,E
NEW QUESTION # 61
What owns the physical drives in an HPE 3PAR StoreServ Express Layout?
- A. a single node
- B. a node pair
- C. a chunklet
- D. a logical disk
Answer: B
NEW QUESTION # 62
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE Synergy Composer
- B. HPE InfoSight for 3PAR
- C. HPE Synergy Image Streamer
- D. HPE SAN Network Advisor
Answer: A
NEW QUESTION # 63
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?
- A. Nimble
- B. Primera
- C. MSA
- D. Nimble dHCI
Answer: B
NEW QUESTION # 64
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR Persistent Ports
- B. HPE 3PAR MPIO
- C. HPE 3PAR Access Guard
- D. HPE 3PAR Persistent Cache
Answer: A
NEW QUESTION # 65
A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?
- A. LACP
- B. FSPF
- C. NPIV
- D. VSF
Answer: B
NEW QUESTION # 66
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?
- A. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
- B. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
- C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
- D. Design an array with older version of the firmware to ensure compatibility
Answer: C
NEW QUESTION # 67
Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer's current environment?
- A. NinjaStars
- B. NinjaCrawler
- C. NinjaThin
- D. StoreVista
Answer: A
NEW QUESTION # 68
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?
- A. HPE Nimble dHCI
- B. HPE Primera
- C. HPE XP8
- D. HPE StoreOnce
Answer: B
NEW QUESTION # 69
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?
- A. OneView
- B. NinjaCrawler
- C. Primera on-node management GUI
- D. Recovery Manager Central
Answer: C
NEW QUESTION # 70
Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)
- A. Presentation Layer
- B. Security Layer
- C. User Management Layer
- D. Data Management Layer
Answer: A,D
NEW QUESTION # 71
A customer has a Nimble HF40 and needs to create a support ticket.
Click the option in the InfoSight portal where the customer can perform this task.
Answer:
Explanation:
Explanation
Graphical user interface, website, timeline Description automatically generated
NEW QUESTION # 72
A customer implemented the HPE StoreEver MSL6480 Tape Library.
Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?
- A. OneView
- B. StoreServe TapeAssure Advanced
- C. StoreEver Data Verification
- D. InfoSight
Answer: B
NEW QUESTION # 73
Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)
- A. VTL/NAS replication
- B. Flexible I/O HBAs
- C. Cloud Bank
- D. Encryption
- E. Catalyst
Answer: A,E
NEW QUESTION # 74
......
Best Value Available! Realistic Verified Free HPE0-J69 Exam Questions: https://realdumps.prep4sures.top/HPE0-J69-real-sheets.html