HPE Aruba Certified HPE6-A81 Real Exam Questions and Answers FREE Updated on Dec 25, 2021
HPE6-A81 Ultimate Study Guide - Prep4sures
HP HPE6-A81 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 20
A customer is troubleshooting the OnGuard Client Activity and is looking into the Live Monitoring -> OnGuard Activity section. What is the Status field representing for this client ?
- A. the Client is online and sends keep-alive messages
- B. the Client health status is HEALTHY
- C. the Client has been successfully profiled
- D. the Client is successful authenticated
Answer: C
NEW QUESTION 21
Refer to the exhibit.
The users connecting to a wireless SSIO "secure-HS-5007" were being processed by an incorrect 802.1 X service created for VIP access and the user gets deny access. The customer has sent you the screenshot to get your support to resolve the issue What changes will you suggest to fix it?
- A. In the HS_Building 802.1X service, remove the service rule condition with Aruba controller location name and leave it in same position
- B. In the HSBuilding 802. IXservice. change the Authentication method for AMCAuth for VIP access and leave it in same position
- C. Delete the HSBuilding 802 IX service, odd VIP access Aruba-Essid-Name as fourth condition to WSBuilding Aruba 802 1X service
- D. To the HS_Building 802.1 X service, add another service rule condition with VIP access Aruba-Essid-Name and leave it in same position
Answer: A
NEW QUESTION 22
A customer would like to allow only the AD users with the "Manager" title from the "HO" location to Onboard their personal devices. Any other AD users should not be authorized to pass beyond the initial device provisioning page. Which Onboard service will you use to implement this requirement?
- A. Onboard Authorization service
- B. Onboard Pre-Auth service
- C. Onboard Provisioning service
- D. Onboard CP login service
Answer: D
NEW QUESTION 23
You have configured a Guest SSIO with Captive-portaI Web Authentication and MAC authentication. The MAC caching expiry time set to 12 hours and the Guest Account expiration time is set to 8 hours. What will happen if the guest were to disconnect from the SSID and re-connect 9 hours later?
- A. The client will successfully pass the MAC authentication but still be redirected to captive portal page.
- B. The client will successfully pass the mac authentication until the mac caching time expires.
- C. The client will fail the MAC authentication and be denied access to the Guest SSIO.
- D. The client will fail to get the MAC Caching role and will be redirected to the captive portal login page
Answer: A
NEW QUESTION 24
Refer to the exhibit.
The customer configured a guest operator access by creating a custom operator profile and the built-in universal ClearPass profile mapping translation rule. When he tests the setup, he gets authentication failed. Using the streenshots sent by the customer as a reference, what would suggest to the customer to fix the issue?
- A. To verify if the username Mike07 has the Active Directory Title attribute set as Reception.
- B. To re-enter the correct username and password for the Active Directory user Mike07.
- C. To correct the case sensitive attribute name in the enforcement profile to admin_privileges
- D. To map the operator profile name HS_Receptionist in the translation rule value field
Answer: D
NEW QUESTION 25
A Customer has these requirements:
* 2.000 loT endpoints that use MAC authentication
* 6.000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
* 1.000 guest endpoints at peak usage that use guest self-registration
* 1500 BYOD devices estimated as 3 devices per User (500 users)
* 2.500 endpoints that have OnGuard installed and connect on a daily basis What licenses should be installed to meet customer requirements?
- A. 11.500 Access. 1.500 Onboard. 2.500 OnGuard
- B. 13.000 Access. 1.500 Onboard. 2.500 OnGuard
- C. 11.500 Access. 500 Onboard. 2.500 OnGuard
- D. 9.000 Access. 500 Onboard. 2.500 OnGuard
Answer: A
NEW QUESTION 26
Refer to the exhibit.
A customer hat configured the Aruba Controller for administrative authentication using ClearPass as A TACAC5 serve' During tasting, the read-only user is getting the root access role What could be a possible reason for this behavior? (Select two.)
- A. The Controller's Admin Authentication Options Default role is mapped to root
- B. On the Controller, the TACACS authentication server is not configured for Session authorization
- C. The Controller Sarver Group Hatch Rules are changing the user role.
- D. The read-only enforcement profile is mapped to the root role
- E. The ClearPass user role associated to the read-only user is wrong.
Answer: A,E
NEW QUESTION 27
You have designed a ClearPass solution for an Information Technology Business Park with 50,377 concurrent sessions including the visitors. The deployment includes eight ClearPass servers handling RADIUS authentication. Guest Self-Registration. Onboard and OnGuard. CPPM1 is acting as Publisher. CPPM2 to CPPM8 are added as subscriber nodes CPPM4 is the designated Standby Publisher. Servers CPPM2 and CPPM3 will be handling the Guest and Onboard HTTPS traffic. On a few devices, Corporate users will perform username and password based authentication with Active Directory accounts and on few devices, they will be using private CA signed TLS certificates to do the authentication The customer has three Active Directories (AD1, AD2 and A03) part of Multi-Domain Forest. To provide authentication redundancy, the customer has configured multiple Virtual IP settings between ClearPass servers in a cluster.
On all the Network Access Devices (NAD), the primary authentication server is configured as the VIP IP address and the secondary authentication server rs configured as CPPM1 MGMT IP address Based on the information provided, which ClearPass nodes will you join to the AD domain
- A. Join CPPM2 to CPPM7 ClearPass servers to the AD root domain.
- B. Join all the eight ClearPass servers to AD1, AD2 and AD3 domains.
- C. Join CPPM1. CPPM4 to CPPM7 servers to the AD root domain
- D. Join CPPM1. CPPM4 to CPPM8 to the AD1. AD2 and AD3 domains.
Answer: D
NEW QUESTION 28
Refer to the exhibit.
You configured a new Wireless 802.1 X service for a Cisco WLC broadcasting the secure-AOM-5007 SSID. The client fails to connect to the SSIO. Using the screenshots as a reference, how would you fix this issue?
- A. Remove the service condition Radius:IETF Service-Type BEL0NGS_T0 Login-User (1), 2.8
- B. Make sure that the Network Devices entry for the Cisco WLC has a vendor setting of "Airespace"
- C. Change the service condition to Radius:lETF Calling-Station-Id EQUALS Secure-ADM-5007
- D. Update the service condition Radws:IETF Called-Stat ion-Id CONTAINS secure-AOM-5007
Answer: D
NEW QUESTION 29
When building an SNMP-based enforcement profile what option can you assign to the user as actions? (Select three).
- A. Enforce a VLAN ID for the client
- B. Reset the connection after the settings has been pushed
- C. Send captive portal web re-direct URL
- D. Enforce Firewall policies
- E. Set a session timeout for the client
- F. ClearPass Downloadable Role
Answer: A,C,E
NEW QUESTION 30
Refer to the exhibit.
You have integrated the Cisco switch with ClearPass to do MAC-Auth for Cisco IP Phones. The phones connect to the network successfully but when you try to change the status of the device from the access tracker, you see only the ArubaOS Radius terminate session options and not the Cisco vendor terminate session options. What will you check to fix this issue?
- A. Verify that Cisco is chosen as the vendor name while adding the Cisco Switch under network devices.
- B. Verify if the Enable RADIUS Dynamic Authorization option is checked for the Cisco switch added under the network devices.
- C. Verify if the Cisco IP Phone is actively connected to the switch to get the Cisco CoA options from ClearPass.
- D. Verify if the ClearPass supports RADIUS Dynamic Authorization for the Cisco IP Phones doing MAC.AUTH.
Answer: A
NEW QUESTION 31
Refer to the exhibit.
A customer with multiple Aruba Controllers has just installed a new certificate for "'.customerdomain.com- on all Aruba Controllers While testing the existing guest Self-Registration page the customer noticed that the logins are failing While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page.
- A. Change the 'IP Address field to" securelogin.customerdomain.com
- B. Change the "IP Address field to "captiveportal-login.customerdomain.com".
- C. Change the "Secure Login' field to "Use Vendor Default".
- D. Add PTR records on the DNS server for "securelogin arubanetworks.com".
Answer: B
NEW QUESTION 32
A customer is planning to implement machine and user authentication on infrastructure with one Aruba Controller and a single ClearPass Server. What should the customer consider while designing this solution? (Select three.)
- A. The machine authentication status rs written in the Multi-master cache on the ClearPass Server for 24 hrs
- B. The Windows User must log off. restart or disconnect their machine to initiate a machine authentication before the cache expires.
- C. Machine Authentication only uses EAP TLS. as such a PKI infrastructure should be in place for machine authentication.
- D. The customer does not need to worry about Multi-Master Catht Survivability because the Controller will also cache the machine state.
- E. Onboard must be used to install the Certificates on the personal devices to do the user and machine authentication
- F. The Customer should enable Multi-Master Cache Survivability as the Aruba Controller will not cache the machine state.
Answer: A,B,E
NEW QUESTION 33
Refer to the exhibit.
Your customer has configured the 802.1 X service enforcement conditions with the Endpoint profiling dat a. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly What is the cause of the issue?
- A. An additional authorization source should be configured for profiling to work.
- B. The enforcement policy conditions configured with profiling data are not correct
- C. The enforcement policy rules evaluation algorithm is not configured correctly.
- D. The option, use cached roles and posture from previous sessions should be enabled.
Answer: D
NEW QUESTION 34
A customer is troubleshooting a user that has complained about randomly having issues connecting the network with EAP PEAP using the Corporate Laptop. The initial checks are showing a number of authentication failures but no sign of issues with the ClearPass server or AD.
What can the Customer do to monitor this user Authentication trend closely over the next few days?
- A. configure an Alert using Failed Authentication template with Threshold 1. Interval 5 mins
- B. add to ClearPass Insight Dashboard the Authentication Status widget for this specific user
- C. configure a Report using Radius Failed Authentication template and schedule it to run every 5 mins
- D. add the user name in the Insight/Alert/Watchlitst and get the authentication failures notifications within 30 seconds
Answer: D
NEW QUESTION 35
Refer to the exhibit.
A customer is trying to configure a TACACS Authentication Service for administrative what could be the reason for the Login Status REJECT?
- A. The Enforcement profile used is not a TACACS profile.
- B. The Enforcement profile is not designed to be used on Aruba Controller
- C. The Read-only Administrator role does not exist on the Controller.
- D. The password used by the administrative user is wrong.
Answer: C
NEW QUESTION 36
Refer to the exhibit.
A customer has configured Onboard in a cluster with two nodes. All devices were onboarded in the network through node1 but those clients fail to authenticate through node2 with the error shown What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three)
- A. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
- B. Configure the Network Settings in Onboard to trust the Policy Manager EAP certificate.
- C. Have all of the BYOO clients disconnect and reconnect to the network.
- D. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
Answer: A,C,D
NEW QUESTION 37
You art deploying Cleat Pass Policy Manager with Guest functionality for a customer with multiple Aruba Networks Mobility Controllers. The customer wants to avoid SSL errors during guest access but due to company security policy cannot use a wildcard certificate on ClearPass or the Controllers.
What is the most efficient way to configure the customer's guest solution? (Select two.)
- A. Build one Web Login page with vendor settings for controller (company domain)
- B. Build multiple Web Login pages with vendor settings configured for each controller
- C. Install multiple public certificates with a different Common Name on each controller
- D. Install the same public certificate on all Controllers with the common name "controller.{company domain)
- E. Build one Web Login page with vendor settings for captiveportal-controller (company domain)
Answer: A,C
NEW QUESTION 38
Refer to the exhibit.
A customer it troubleshooting a client not getting the SHV posture updated and the OnGuard agent shows the Health Status Not Known. What could the user do to update the health status?
- A. reinstall the OnGuard agent from the Wired interface
- B. modify the agent.conf file and add the WIRED interface to it
- C. connect using an interface that is configured as Managed Interface
- D. change the Policy Manager Zone mapping and add the WIRED interface range
Answer: B
NEW QUESTION 39
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?
- A. Endpoint Database
- B. Local User Database
- C. Clear Pass Profiler Database
- D. Guest Device Database
Answer: D
NEW QUESTION 40
The customer has configured the guest self-registration with sponsor approval. The guest users that the sponsor email and the other requested details while registering the account but the users were able to complete the authentication and access the internet without the sponsor's approval.
What configuration settings will you check to make this setup work?
- A. Check if sponsor name field is enabled in the register form page
- B. Check if authentication option n is enabled in the self-registration page enabled.
- C. Check if sponsor confirmation is enabled in the self-registration page
- D. Check if sponsor email field is enabled in the register form page
Answer: D
NEW QUESTION 41
Refer to the exhibit.
A year ago. your customer deployed an Aruba ClearPass Policy Manager Server for a Guest SSID hosted in an IAP Cluster The customer just created a new Web Login Page for the Guest SSiD Even though the previous Web Login page worked test with the new Web Login Page are failing and the customer has forwarded you the above screenshots.
What recommendation would you give the customer to fix the issue?
- A. The service type configured is not correct. The Guest authentication should be an Application authentication type of service.
- B. The customer should reset the password for the username accxCdlexam.com using Guest Manage Accounts.
- C. The WebLogin Pre-Auth Check is set to Aruba Application Authentication which requires a separate application service on the policy manager
- D. The Address filed under the WebLogin Vendor settings is not configured correctly. It should be set to instant, Aruba networks com,
Answer: D
NEW QUESTION 42
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- B. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
- C. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- D. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
Answer: A
NEW QUESTION 43
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
- B. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- C. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
- D. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
- E. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
Answer: B,E
NEW QUESTION 44
......
Ultimate Guide to Prepare HPE6-A81 Certification Exam for HPE Aruba Certified: https://realdumps.prep4sures.top/HPE6-A81-real-sheets.html